1. Cooling dehumidifier:

1) By using the function can be divided into: heating type, cooling type, thermostat, multifunction dehumidifier.

2) according to whether the fan belt can be divided into: conventional dehumidifier, duct dehumidifier.

3) according to the structure can be divided into: the overall style, split, overall mobile.

4) Press the temperature range can be divided into: A type (normal type 18 ~ 38 ℃), B-type (low temperature 5 ~ 38 ℃).

5) Press back to the wind can be divided into: the conveyor belt before returning to the front hood-type, back to the sending type.

6) Press control form can be divided into: automatic and non-automatic type.

7) according to the special usage points, there is a new wind, explosion-proof type.

2. In addition to the runner (suction) Wet Machine

The main structure is a dehumidifier continuously rotating honeycomb dried runner. Drying dehumidifier rotor is the key component adsorbed water, which is composed of a corrugated medium by a special heat resistant composite materials. Corrugated medium containing hygroscopic agent. This design, compact structure, large surface area and can provide sufficient contact with wet air and moisture media. Thus greatly improving the dehumidifying efficiency dehumidifier

3. In addition to the solution (suction) Wet Machine

Liquid desiccant air conditioning system is based on a moisture absorbent desiccant solution to regulate the air humidity, with water as the refrigerant temperature conditioned air dehumidification air-handling technology initiatives and the development of new air-conditioning products can provide fresh air operating conditions; its core is the use of dehumidification agents physical characteristics, and methods by liquid desiccant regeneration of innovation to achieve above the dew point temperature efficient dehumidification. Temperature and humidity regulation system is completely open at atmospheric pressure atmosphere. It has manufactured simple, reliable operation, energy efficiency and other technical characteristics. The system consists of four basic modules. Namely air (fresh air and return air) module, the humidity control module, temperature adjustment module and solution regeneration module.

4. In addition to the pipeline (suction) Wet Machine

Pipe dehumidifier with an evaporator to give air cooling and dehumidification, and condensing heat recovery system, to make up for cooling and dehumidifying the air because of heat dissipation, is an energy efficient dehumidification mode, it is possible to provide a different indoor and outdoor at a temperature of indoor heating, cooling and dehumidifying indoor temperature and humidity to meet the requirements of the pipeline temperature and humidity control methods and equipment, pipes dehumidification system consists of cooling and dehumidification mode, the thermostat dehumidification mode, heating dehumidification mode, heating mode Automatic defrost components.